Elenco Electronics rc snap rover Bedienungsanleitung PDF herunterladen (Seite 4)

-3-

The Electronic Snap Circuits

kit has 101 projects. They are

simple to build and understand.

The Snap Circuits

kit uses building blocks with snaps to build

the different electrical and electronic circuits in the projects.

Each block has a function: there are switch blocks, lamp

blocks, battery blocks, different length wire blocks, etc. These

blocks are in different colors and have numbers on them so

that you can easily identify them. The circuit you will build is

shown in color and with numbers, identifying the blocks that

you will use and snap together to form a circuit.

For Example:

This is the switch block which is green and has the marking

on it as shown in the drawings. Please note that the drawing

doesn’t reflect the real switch block exactly (it is missing the ON

and OFF markings), but gives you the general idea of which

part is being used in the circuit.

This is a wire block which is blue and comes in different wire

lengths.

This one has the number , , , , or on it

depending on the length of the wire connection required.

There is also a 1-snap wire that is used as a spacer or for

interconnection between different layers.

To build each circuit, you have a power source block

number that needs two (2) “AA” batteries (not included

with the Snap Circuits

kit).

A large clear plastic base grid is included with this kit to help

keep the circuit blocks properly spaced. You will see evenly

spaced posts that the different blocks snap into. You do not

need this base to build your circuits, but it does help in

keeping your circuit together neatly. The base has rows

labeled A-G and columns labeled 1-10.

Next to each part in every circuit drawing is a small number

in black. This tells you which level the component is placed

at. Place all parts on level 1 first, then all of the parts on level

2, then all of the parts on level 3, etc.

The 2.5V bulb comes packaged separate from its socket.

Install the bulb in the lamp socket whenever that part is

used.

Place the fan on the motor whenever that part is used,

unless the project you are building says not to use it.

Some circuits use the jumper wires to make unusual

connections. Just clip them to the metal snaps or as

indicated.

Note: While building the projects, be careful not to

accidentally make a direct connection across the battery

holder (a “short circuit”), as this may damage and/or quickly

drain the batteries.

How To Use It

2 3 4 5 6

1 2 3 4 5 6 7 8 9 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Elenco Electronics rc snap rover Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Spielzeug & Zubehör Elenco Electronics rc snap rover